1. Hi, I recently got an old laptop with NeoMagic 256AV sound card.:D It had 95 and ran all i wanted except multi-monitor support.:cool: I therefore decided to upgrade to 98, and did so. I did a backup of the drivers, and all the files I wanted to keep. I started the laptop up, and was greeted.
2. NeoMagic Corporation was incorporated in California in May 1993 and subsequently reincorporated in Delaware in February 1997. NeoMagic designs and delivers consumer electronic device solutions with semiconductors and software for video, television, imaging, graphics, and audio.
3. NeoMagic VGA Card – Graphics Card Cards – Video Adapter Adapters – Drivers manuals BIOS Firmware. Vendors added according Jedec K. This compensation may impact how and where products appear on this site including, for example, the order in which they appear.

ALSA SoundCard Matrix

NeoMagic Corporation OTC Pink: NMGC is a fabless semiconductor company and supplier of low-power audio and video integrated circuits for mobile use (MagicMedia). In October 2012, NeoMagic entered into the e-Commerce arena with the acquisition of its MercadoMagico.com division. ‘No sound or audio is missing on Windows 10’ might occur due to outdated or corrupt Sound Card and Audio drivers. ‘Blurry screen or shuttering problems’ because the graphic card driver is not up-to-date. Well, these are some of the common driver-related errors that might occur each time after installing the latest Windows 10 updates.

Feel free to place changes/​corrections yourself, but please follow the Universal Soundcard Description document before you start.

All USB devices that are standards compliant will work. If they do not please report to the mailing lists. If your USB device is not on this list yet, here are some generic install instructions.

If you are looking for a particular capability, go here to search by tag.

Sound Card List

Drivers

Platforms

Sometimes it may be of interest to show only modules and related pages for a specific platform. Each ALSA module may be used on different CPU architectures. The following categories contain the existing modules for these architectures only:

16.2.1 Locating the Correct Device

Before you begin, you should know the model of the card you have, the chip it uses, and whether it is a PCI or ISA card. FreeBSD supports a wide variety of both PCI and ISA cards. If you do not see your card in the following list, check the pcm(4) manual page. This is not a complete list; however, it does list some of the most common cards.

• Crystal 4237, 4236, 4232, 4231

• Yamaha OPL-SAx

• OPTi931

• Ensoniq AudioPCI 1370/1371

• ESS Solo-1/1E

• NeoMagic 256AV/ZX

• Sound Blaster Pro, 16, 32, AWE64, AWE128, Live

• Creative ViBRA16

• Advanced Asound 100, 110, and Logic ALS120

• ES 1868, 1869, 1879, 1888

• Gravis UltraSound

• Aureal Vortex 1 or 2

To use your sound device, you will need to load the proper device driver. This may be accomplished in one of two ways. The easiest way is to simply load a kernel module for your sound card with kldload(8). Alternatively, you may statically compile in support for your sound card in your kernel. The sections below provide the information you need to add support for your hardware in this manner. For more information about recompiling your kernel, please see Chapter 9.

16.2.1.1 Creative, Advance, and ESS Sound Cards

If you have one of the above cards, you will need to add:

to your kernel configuration file. If you have a PnP ISA card, you will also need to add:

For a non-PnP ISA card, add:

to your kernel configuration file. The settings shown above are the defaults. You may need to change the IRQ or the other settings to match your card. See the sbc(4) manual page for more information.

Note: The Sound Blaster Live is not supported under FreeBSD 4.0 without a patch, which this section will not cover. It is recommended that you update to the latest -STABLE before trying to use this card.

Neomagic Sound Cards For Video Editing

16.2.1.2 Gravis UltraSound Cards

For a PnP ISA card, you will need to add:

to your kernel configuration file. If you have a non-PnP ISA card, you will need to add:

to your kernel configuration file. You may need to change the IRQ or the other settings to match your card. See the gusc(4) manual page for more information.

16.2.1.3 Crystal Sound Cards

For Crystal cards, you will need to add:

to your kernel configuration file.

16.2.1.4 Generic Support

Neomagic Sound Cards For Kids

For PnP ISA or PCI cards, you will need to add:

to your kernel configuration file. If you have a non-PnP ISA sound card that does not have a bridge driver, you will need to add:

to your kernel configuration file. You may need to change the IRQ or the other settings to match your card.

Computer Sound Cards

16.2.1.5 Onboard Sound

Neomagic Sound Cards & Media Devices Driver Download Windows 10

Some systems with built-in motherboard sound devices may require the following option in your kernel configuration: