Through this post, you can download Qualcomm HS-USB QDLoader 9008 Drivers and install them on your PC. These drivers are compatible with any Windows 7, 8, 8.1 and 10 PC with 32-bit or 64-bit CPU architecture. Extract “MT65xx Drivers” folder from the archive. Open up the Device Manager window on your Windows PC. Connect your device to the PC via the USB cable keeping an eye on the Device Manager window. The notification LED on the MT65xx device (if there is one) must light up in a deep blue color as soon as you connect it to the PC. For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following: Provide an INF file that specifies the Ports device setup class and the Serial function driver as the service for the port. Additionally, in the Device Manager an 'ADB Interface' shows up without a driver when PTP is selected, but I can't find the phone listed in 'adb devices'. How do I load the correct LG Mobile Drivers so that my system recognizes the ADB Interface? - Dave- Post added at 01:36 AM - Previous post was at 01:14 AM.

With an Android-powered device, you can debug your Android applications just as you would on the emulator.

Downloading USB Driver

If you don’t have USB driver for LG Android device, you can download it from the product support page of the LG Electronics site.

1. Visit LG Electronics site.
2. Select your region, country and language.

​​

3. Select Support > Product Help > Software, Firmware & Drivers menu.
4. Select LG Mobile Drivers and click Windows or Mac button to download LG Universal Mobile Drivers.

​​

Lg Port Devices Driver Windows 7

Installing USB Driver

If your phone is connected to the USB Port of your PC, Disconnect it before running the installer you just downloaded.

1. Click the downloaded.exe file.

2. Select the language and click Next button to install LG Universal Mobile Driver.

​​

3. When the driver is installed successfully, you can see the message as below.
​​

4. Please connect your USB cable directly to the PC. Do not use a USB Hub.

Setting up a Device

Before you start debugging your Android application, you need to set up a device. Follow the steps below.
1. Connect your device to your development computer.
2. Turn on 'USB Debugging' on your device.
On the device, go to Settings > Developer options and enable USB debugging in the device system settings, under Settings > Developer options.

3. Test that the driver is correctly installed using adb.
You can verify that your device is connected by executing adb devices from your SDK platform-tools/ directory. If connected, you'll see the device name listed as a 'device.'

Install Lg Usb Drivers

​